Filler effects on the thermomechanical response of stretched rubbers

This paper deals with the calorimetric analysis of deformation processes in filled styrene-butadiene rubbers. More especially, the study focuses on the effects of the addition of carbon black fillers on the calorimetric response of “demullinized” SBR. Temperature variations are measured by infrared thermography during cyclic uniaxial tensile tests at ambient temperature. Heat sources¹ produced or absorbed by the material due to deformation processes are deduced from temperature fields by using the heat diffusion equation. First, the results show that no mechanical (intrinsic) dissipation is detected for weakly filled SBR, meaning that the heat produced and absorbed over one mechanical cycle is the same whatever the stretch ratio reached. Second, the mechanical dissipation in highly filled SBR is significant. The quantitative analysis carried out highlights the fact that it increases quasi-linearly with the stretch ratio. Finally, a simplified framework is proposed to discuss the identification of the heat sources, in particular the mechanical dissipation.     

烷氧基菲咯啉设计合成及其氮磷杂配铜光敏剂的光解水制氢性能

以功能化氮配体为导向,以4,7-二苯基-1,10-菲咯啉为原料,经季铵化、氧化、卤化和醚化合成了一类新型的2,9-二烷氧基-4,7-二苯基-1,10-菲咯啉配体5a~5e。再以Xantphos为膦配体,通过原位配位方法合成一系列氮磷杂配铜光敏剂（CuPS A~H）,在均相光解水制氢体系中研究其光敏活性。制氢结果表明,以2,9-二乙氧基为较佳取代基,CuPS D的催化产氢总转换数（TON）可达270。在光电物理性能分析中,发现这类杂配铜配合物都有一个相似的氧化还原电位（E^oxd=-0.8 V,E^red=-1.2 V）。具有乙氧取代基的铜配合物CuPS D相对于其他取代基的铜基配合物,荧光最弱,表明乙氧基有助于提高荧光淬灭效率,增强铜光敏剂的光化学转换能力。     

多种类表面活性剂临界胶束浓度定量构效关系

表面活性剂的临界胶束浓度(CMC)是个非常重要的物质特性参数, CMC在研究表面活性剂的工业应用和生物利用方面发挥着关键作用. 本工作提出了一个新的拓扑指数—扩展距离矩阵, 建立了一个稳定的构效关系模型, 并对175种表面活性剂的临界胶束浓度进行了计算预测. 结果表明, 基于新的拓扑指数建立的构效关系模型计算临界胶束浓度能给出稳定可靠的预测结果, 其预测结果相关性系数R²(training set)=0.9295, 相对标准偏差ARD(training set)=8.20%, R²(testing set)=0.9257, ARD(testing set)=6.76%. 与文献中模型预测结果的对比表明, 本工作在稳定性和可靠性上均有显著改善.     

Synthesis and biological evaluation of novel triazole derivatives as antifungal agents

A series of 1-(benzylamino)-2-(2,4-difluorophenyl)-3-(1H-1,2,4-triazol-l-yl)propan-2-ols compounds were synthesized and evaluated for their antifungal activities in vitro.The results showed that compounds 6A and 6B exhibited good antifungal activity.Compound 6A8 showed the strongest antifungal activity,which was significantly higher than that of the lead compounds and positive-control drugs Fluconazole and Itraconazole.In particular,the antifungal activity of compound 6A8 against Candida albicans and Candida krusei(MIC80 both at 0.00097μg/mL) was 515 and 64 times that of Fluconazole,respectively.The structure-activity relationships of the synthesized compounds were discussed,and the docking model of the target compounds with fungal lanosterol 14α-demethylase (CYP51) was analyzed.     

A measure of mutual complete dependence in discrete variables through subcopula

Siburg and Stoimenov [12] gave a measure of mutual complete dependence of continuous variables which is different from Spearman's ρ and Kendall's τ. In this paper, a similar measure of mutual complete dependence is applied to discrete variables. Also two measures for functional relationships, which are not bijection, are investigated. For illustration of our main results, several examples are given.     

Estimation of martensite feature size in a low-carbon alloy steel by microtexture analysis of boundaries

A methodology for classifying the hierarchy of martensite boundaries from the EBSD microtexture data of low-carbon steel is presented. Quaternion algebra has been used to calculate the ideal misorientation between product α variants for Kurdjumov–Sachs (KS) and its nearby orientation relationships, and arrive at the misorientation angle-axis set corresponding to packet (12 types), block (3 types) and sub-block boundaries. Analysis of proximity of experimental misorientation between data points from the theoretical misorientation set is found to be useful for identifying the different types of martensite boundaries. The optimal OR in the alloy system and the critical deviation threshold for identification of martensite boundaries could both be ascertained by invoking the ‘Enhancement Factor’ concept. The prior-γ grain boundaries, packet, block and sub-block boundaries could be identified reasonably well, and their average intercept lengths in a typical tempered martensite microstructure of 9Cr–1Mo–0.1C steel was estimated as 31 μm, 14 μm, 9 μm and 4 μm respectively.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

High-resolution transmission electron microscopy study on reversion of Al2CuMg precipitates in Al–Cu–Mg alloys under irradiation

Image deconvolution analyses showed that reversion of S-Al₂CuMg precipitates occurred in an Al–Cu–Mg alloy during high-resolution transmission electron microscopy observations. A fraction of Mg and Cu atoms in the precipitates diffused into Al matrix due to electron beam irradiation at 300 kV, resulting in structural/chemical reversion of the precipitates. The structural reversion of the S-Al₂CuMg precipitates is closely related with irradiation-induced displacement of atoms. The strong attraction between Cu and Mg atoms might assist the sub-threshold displacement of Cu atoms. One transitional structure is determined to be S′′-Al₁₀Cu₃Mg₃, a precursor of S-Al₂CuMg. Two other transitional structures, Al₃CuMg and Al₁₈Cu₅Mg₅ which have the same lattice parameters of a = c = 0.405 nm as that of S′′-Al₁₀Cu₃Mg₃, but different b values, are suggested.     

CuSO_4溶液中Cu元素浓度的激光诱导击穿光谱测量研究

利用激光诱导击穿光谱技术对CuSO4溶液中的Cu元素浓度进行实验测量。利用配置的七种浓度的CuSO4溶液,采用统计探索性数据分析方法给出了Cu元素定标曲线,其拟合度系数R2大于0.98,激光诱导击穿光谱的平均相对偏差值为6.9%,Cu元素的平均最小检测限为12ppm。利用去一交互检验方法采用分析谱线CuⅠ324.75nm和CuⅠ327.40nm对应的七种溶液的平均测量相对误差分别为6.52%和5.86%。当Cu元素浓度在10ppm时实验相对误差较大,其值为10.3%,而浓度达到2 000ppm时相对误差值减小,仅为1.1%,说明LIBS技术在溶液较低元素浓度检测方面的准确度有待提高。研究结果表明激光诱导击穿光谱技术在环境水污染重金属元素检测方面具有潜在的应用前景。